Sill & Rafter

Plumbing & Water

Plumbing & water

Pipe and drain sizing from the plumbing and fuel gas codes, septic tanks and drain fields for the states whose rules we have read, and the water numbers around a house: wells, expansion tanks and pools.

  • Drain Pipe Size Calculator

    Add up the drainage fixture units of a house and find the smallest building drain or horizontal branch the 2021 IPC allows, with its minimum slope.

  • Expansion Tank Sizing Calculator

    Pick the thermal expansion tank for a water heater from its size, supply pressure and temperature with AMTROL's chart, and see when the code asks for one.

  • Gas Load Calculator: BTU to CFH

    Add up your gas appliances' input ratings and convert the total to cubic feet per hour, as the fuel gas code does to size natural gas pipe. Propane too.

  • Gas Pipe Size Calculator

    Find the smallest Schedule 40 gas pipe for your total appliance load and longest run, using the 2021 IFGC sizing tables for natural gas and propane.

  • Peak Water Demand Calculator

    Turn a total of water supply fixture units into peak demand in gallons per minute, read from IRC 2021 Table P2903.6(1) for tank toilets or flushometer valves.

  • Plumbing Vent Size Calculator

    Find the minimum vent pipe size for an individual or branch vent, or for a stack vent, with the rules and tables of the 2021 International Plumbing Code.

  • Pool Calcium Hardness Calculator

    How much calcium chloride raises your pool's calcium hardness to a target, or how much water to replace to bring it down, with recommended ranges.

  • Pool Volume and Heat-Up Time Calculator

    How many gallons your pool holds, from its shape and depths, and how long a heater of a given input and efficiency takes to warm it.

  • Septic Drain Field Calculator

    Size a conventional septic drain field under the rules of Texas, Florida, Pennsylvania, Minnesota or North Carolina: area and trench length.

  • Septic Tank Capacity Calculator

    How many gallons a septic tank holds, from its inside dimensions: rectangular or round tanks, gallons per inch, and EPA's rule for when to pump.

  • Septic Tank Size Calculator

    Find the design flow and the minimum septic tank size for a house under the state rules of Texas, Florida, Pennsylvania, Minnesota and North Carolina.

  • Trap Arm Length Calculator

    Check the longest allowed distance from a fixture trap to its vent, with the slope the 2021 International Plumbing Code requires for each trap size.

  • Water Service Pipe Size Calculator

    Size the water service pipe, the meter and the main to the house from fixture units, pressure and pipe length, with Table E104.1 of the plumbing code.

  • Water Supply Fixture Units Calculator

    Add up the water supply fixture units for a house with the IRC 2021 values, and see the peak demand in gallons per minute that the pipe has to carry.

  • Well Flow Rate Calculator

    Find the flow at a tap from a bucket test, the water a house needs each day, and the storage a low-yield well needs, from New York's well guidance.

Before you size a pipe

Most of the pipe sizing tools here read a table from the 2021 International Plumbing, Residential or Fuel Gas Code. Codes size pipe in steps, so when your numbers fall between two rows, the calculators take the next row up and say so. The gas calculators are for planning a layout and checking a quote: gas piping is work for a licensed installer, with a permit.

Septic systems

Each state writes its own septic rules, and they differ more than most people expect: the same house can need a noticeably different tank or drain field on either side of a state line. The septic calculators ask for your state and cover only the states whose rules we have read. Anywhere else, your county or state health department has the numbers.