Sill & Rafter

Roof & Exterior

Roof & exterior

The outside of the house, from the roof edge down: gutters and downspouts, attic vents, windows that meet egress and energy rules, fireplace flues and chimney height, garage door openings and rainwater storage.

  • Attic Ventilation Calculator

    Find the net free vent area an attic needs under the residential code's 1/150 rule or its 1/300 exception, split between upper and soffit vents.

  • Chimney Draft Calculator

    The theoretical draft of a chimney from its height, the outdoor temperature and the gas temperature inside it, with what stove makers ask for.

  • Downspout Extension Calculator

    How many extension pieces carry roof water the distance you want from the foundation, with the residential code's 5 ft rule and 6 inches of fall in 10 ft.

  • ENERGY STAR Window Checker

    Check a window's NFRC U-factor and SHGC against ENERGY STAR for your climate zone, with what each number on the NFRC label means.

  • Egress Window Calculator

    Check a window against the residential code's emergency escape rules: net clear area, minimum height and width, sill height and window well size.

  • Fireplace Flue Size Calculator

    Find the minimum flue area for a masonry fireplace from its opening, with the IRC 2021 ratios, and the smallest standard clay liner that meets it.

  • Garage Door Rough Opening and Clearance Calculator

    Check the rough opening, headroom, side room and backroom a sectional garage door needs, from the installation instructions of Clopay, Amarr and Wayne Dalton.

  • Garage Door Weight Calculator

    How much your garage door weighs from its extension spring color, where the weight is printed, and what the opener's rating really means.

  • Gutter Calculator

    Plan a gutter job: total length, fall at your maker's pitch, downspouts, guard pieces and elbows, from gutter makers' installation instructions.

  • Gutter and Downspout Size Calculator

    Size downspouts and check gutters the way the 2021 International Plumbing Code does: peak flow from roof area and rainfall, then the code tables.

  • Hearth Extension and Chimney Height Calculator

    Size the hearth extension of a masonry fireplace and the height of its chimney above the roof under the 2021 IRC, with the code's clearances to combustibles.

  • Insulated Garage Door Heat Loss Calculator

    How much heat an insulated garage door keeps in compared with your current door, from tested U-factors, the door's size and the temperatures.

  • Rainwater Harvesting Calculator

    How many gallons of rain a roof can collect in a storm, a month or a year, with the Texas Water Development Board's method and the first flush to divert.

  • United Inches Calculator

    Add width and height to get the united inches of a window, with fractions kept exact, and see why a fraction can move a window into a higher price bracket.

  • Wall Area Calculator

    Work out the gross and net wall area of a house, gables included, for siding or paint, and the window-to-wall ratio from the same measurements.

  • Window U-Factor and SHGC by Frame and Glazing

    The default U-factor, SHGC and visible transmittance the energy code assigns to unlabeled windows, by frame and glazing, and how they compare with ENERGY STAR.

Windows

The window tools answer different questions: whether an opening is big enough to escape through in a fire, whether a window meets ENERGY STAR for your climate, what U-factor a window has when its label is gone, and how a window is measured for ordering. They rely on different sources, and each page names its own.

Water off the roof

The gutter calculators work out gutter and downspout sizes from roof area and rainfall intensity, and the parts for a run of gutter. The downspout extension calculator checks how far from the foundation the water lands.