Sill & Rafter

Roof & Exterior · Calculator

Rainwater Harvesting Calculator

Enter the roof area that drains to your tank and the rainfall for a storm, a month or a year. The calculator gives the gallons in theory and at a realistic system efficiency, and how much of the first flush to divert.

Measured flat, as seen from above, not along the slope.

For one storm, a month or a year: the result is for the same period.

The Texas Water Development Board says most installers use about 75 to 85 percent.

Rainwater you can collect

33,912 gallons

In theory
39,896 gallons (0.623 gal per sq ft per inch)
At 85% efficiency
33,912 gallons
First flush to divert
20 to 40 gallons each rain

Some water is always lost, to the first flush, evaporation, splash-out, gutter overshoot in hard rain and leaks; once the tank is full, the rest overflows.

Texas Water Development Board, Texas Manual on Rainwater Harvesting (2005) and rainwater FAQ.

An inch of rain on a square foot of roof is about 0.62 gallons. A 2,000 square foot roof under 32 inches of rain can yield 33,911.6883 gallons at 85 percent efficiency.

The arithmetic

An inch of rain on one square foot is 144 cubic inches of water, and a US gallon is 231, so it is about 0.62 gallons: the figure the Texas Water Development Board's manual uses. Multiply it by the roof area and the inches of rain to get the gallons in theory. Measure the roof flat, as its footprint seen from above, not along the slope.

What you really collect

Some water is always lost, to the first flush, evaporation, splash-out, gutters overshooting in hard rain and leaks; rough roofs lose more, and once the tank is full the rest overflows. The Board says most installers use a system efficiency of about 75 to 85 percent. Its own example: a 2,000 square foot roof in Austin, with 32 inches of rain a year and 85 percent efficiency, collects about 34,000 gallons a year.

A worked example

A 2,000 square foot roof, measured flat, gets 32 inches of rain a year. In theory that is 2,000 × 32 × 0.623 = 39,896.1039 gallons. At 85 percent efficiency, 33,911.6883 gallons a year reach the tank; the Board, rounding to 0.62, puts it at about 33,700. Each rain, divert 20 to 40 gallons of first flush.

The first flush

The first rain washes dust and debris off the roof, so systems divert it before it reaches the tank. The manual's recommended diversion ranges from 1 to 2 gallons for each 100 square feet of collection area, and opinions vary with dry days, debris and the roof; the calculator gives that range for your roof.

Questions people ask

How much rainwater can I collect from my roof?

About 0.62 gallons per square foot per inch of rain in theory, and 75 to 85 percent of that in practice: roughly 0.47 to 0.53 gallons per square foot per inch.

How many gallons does 1 inch of rain produce on 1,000 square feet?

About 623 gallons in theory, or about 530 at 85 percent efficiency.

Should I measure the roof along the slope?

No. Use the footprint, the area of the roof seen from above: a steeper roof does not catch more rain.

Sources