About
Editorial policy
How a Sill & Rafter page is made, from the source document to the published calculator, and what we do when something is wrong.
Sources first
Every calculator starts from a document we can cite: a code section, a state rule, a manufacturer's published data, or a publication of a university extension service or a government agency. We prefer the original to a summary of it, and the most specific source to a general one: a state's septic rule rather than a general guide, a manufacturer's own chart rather than a reseller's copy. Each page lists its sources at the bottom, with links.
Which edition
Building codes come in editions, and each state or city adopts its own, often with amendments. Every page says which edition its calculator follows. For most code-based tools that is the 2021 edition of the International Codes; where we can, we read them in an adoption a city publishes free of charge, such as Seattle's residential, fuel gas and energy codes. Your building department decides which rules apply to your project.
From table to calculator
The numbers a calculator uses are stored as data next to the source they came from, never typed into the text by hand. When the source is a table, we copy it cell by cell and check it against the source text, and automated tests compare the calculator with values read straight from the source.
Every number in the explanation on a page is either one the calculator computes for its worked example or a fact taken from a source cited on that page. A script checks every page before it is sent for review and holds it back when a number is neither.
Stated assumptions
Tables rarely cover every case. When a length falls between two rows, when a source is silent, or when two sources disagree, we choose a reading, usually the more conservative one, and say so on the page. When an input goes beyond what the source covers, the calculator tells you so instead of guessing.
Review before publication
The text of every page is written with AI (see how we use AI) and reviewed by a person. Before a page goes live, Francesco Zinghinì, the site's author, reads it and either approves it or sends it back with notes. A page that has not been approved is not published, and any later change to its text, to its calculator or to the calculator's data needs a new approval.
Independence
No manufacturer, retailer or contractor pays for a mention or sees a page before it is published. When we name a product, it is because its published data is the source of a number on the page.
Safety
Some projects can hurt people when they go wrong: gas piping, electrical work, septic systems, egress windows. Those pages carry a notice. The calculators are for planning; they do not replace a permit, an inspection or a licensed professional.
Corrections and updates
If you find an error, tell us through the contact page. We check the report against the source; if we were wrong, we correct the data, rerun the tests and publish the corrected page after review. When a source we rely on is revised, such as a new code edition or an updated manufacturer chart, we revise the pages that depend on it.
Last updated November 17, 2026.