Sill & Rafter

Roof & Exterior · Calculator

Wall Area Calculator

Enter the total length of the walls, their height, the gables and the windows and doors. The calculator gives the gross wall area, the net area once the openings are taken out, and the window-to-wall ratio.

The perimeter of the house, or the walls you are covering.

From the top of the wall to the peak.

Net wall area

1,265 sq ft

Walls
1,260 sq ft
Gables
225 sq ft
Gross wall area
1,485 sq ft
Windows and doors
220 sq ft
Window-to-wall ratio
12.1%

The window-to-wall ratio here is the window area divided by the gross wall area, gables included.

Geometry of the walls.

A house with 140 feet of walls 9 feet high and two gables has 1,485 square feet of wall. Taking out 12 windows and 2 doors leaves 1,265 square feet to cover.

Walls and gables

The rectangular part of the walls is the total length times the wall height; for a whole house, the length is its perimeter. A gable is the triangle of wall under a sloped roof's end, from the top of the wall to the peak: its area is half its width times its height. Add the gables to the rectangle for the gross wall area.

Net area

From the gross area, take out the windows and doors you will not cover, each its width times its height: a 36 by 80 inch door is 20 square feet. What is left is the net area to side or paint.

A worked example

A house measures 140 feet around, with walls 9 feet high: 1,260 square feet. Its two gables are 30 feet wide and 7.5 feet high, 225 square feet together, for a gross wall area of 1,485. Twelve windows of 15 square feet and two doors of 20 take out 180 and 40, leaving 1,265 square feet. The window-to-wall ratio is 180 ÷ 1,485 = 12.1 percent.

Window-to-wall ratio

The window-to-wall ratio is the window area divided by the gross wall area. The calculator uses the gross area with the gables included and leaves out the doors. It is a planning figure: compare it with the figure your energy code or designer uses, which may count the walls differently.

Questions people ask

How do I calculate the area of a gable?

Half the width times the height: a gable 30 feet wide and 7.5 feet high, from the top of the wall to the peak, is 112.5 square feet.

Should I subtract windows and doors?

For the area you will actually cover, yes: that is the net area. For the window-to-wall ratio, use the gross area.

What is a good window-to-wall ratio?

It depends on the climate, the orientation and the design. This page computes the ratio; your energy code or designer sets any limit.