Plumbing & Water · Calculator
Well Flow Rate Calculator
Time how long a bucket takes to fill at a tap to get the flow in gallons per minute. If you know the well's yield from the driller's test, the calculator also gives the storage New York's health department recommends for a low-yield well, and the water standing in the casing.
Flow at the tap
5 gallons per minute
- Daily water need
- 330 gallons a day for 3 bedrooms, moderate use
- Water per foot of casing
- 1.47 gallons
A bucket test shows the flow at that tap now, with the pump and pipes you have. The well's yield, the rate it can keep up over an extended period, comes from a yield test by a driller.
New York State Department of Health, Individual Water Supply Wells Fact Sheet #2.
A 5 gallon bucket that fills in 40 seconds means 7.5 gallons per minute at that tap. A house with 3 bedrooms and moderate water use needs about 330 gallons a day.
The bucket test
Time how many seconds a bucket of known size takes to fill at a tap. The flow is:
gallons per minute = gallons in the bucket ÷ seconds × 60
A 5 gallon bucket that fills in a minute means 5 gallons per minute; in 30 seconds, 10.
Flow, yield and peak demand
New York's Department of Health defines a well's yield as the rate, in gallons per minute, that it can supply continuously over an extended period. It takes 5 gallons per minute, two fixtures running at 2.5 each, as a good estimate of a typical household's peak demand, and says a well that reliably yields 5 should meet peak and daily needs for most homes. Where possible, it wants a new well to produce at least that.
For daily use, a household with moderate water use needs about 110 gallons per bedroom. That leaves out lawn watering, spa tubs, extra occupants and other heavy uses.
A worked example
A 5 gallon bucket fills in 40 seconds at the outdoor faucet: 5 ÷ 40 × 60 = 7.5 gallons per minute at that tap. The well record shows a yield of 2 gallons per minute, below the 5 gallons per minute New York asks for, so its table recommends at least 200 gallons of storage for a house with 3 bedrooms, which needs about 330 gallons a day. With 120 feet of water above the pump in a 6 inch casing, the well itself holds about 176 gallons.
Storage for a low-yield well
A well that yields less than 5 gallons per minute can often cover the day's total but not the peak. Water stored in a tank, in the well itself or in both lets it meet the peak too. New York recommends at least this much storage, in gallons:
| Yield | 2 br | 3 br | 4 br | 5 br |
|---|---|---|---|---|
| 5 or more | None | |||
| 3 to 5 | 100 | 150 | 200 | 250 |
| 1 to 3 | 150 | 200 | 250 | 300 |
| 0.5 to 1 | 200 | 250 | – | – |
| Under 0.5 | Not recommended for use | |||
The bands share their end points, so a yield of exactly 3 or exactly 1 fits two rows; the calculator takes the row with more storage. Where the table has no figure, a water well professional should size the storage.
Water stored in the casing
The water standing in the well above the pump is storage too. New York puts a typical 6 inch well at about 1.5 gallons per foot of casing; multiply it by the height of water above the pump when the pump is off. The calculator works out the gallons per foot for any diameter from the area of the casing. Shallow wells and wells that recover slowly may not hold reliable storage, so New York advises asking a well professional before counting on it.
Your fixtures' peak demand
To estimate the peak demand of the fixtures in your house under the residential plumbing code, rather than the typical 5 gallons per minute, use the peak water demand calculator.
Questions people ask
What is a good flow rate for a well?
New York's Department of Health asks for a long-term yield of at least 5 gallons per minute where possible, enough for two fixtures at once. Wells that yield less can still serve a house with added storage.
How do I test my well's flow rate?
A bucket test at a tap gives the flow your pump delivers now. The well's own yield needs a yield test by a well driller, over an extended period; ask the driller who built the well or check the well's records.
How much water does a 6 inch well hold per foot?
About 1.5 gallons per foot, as New York puts it; the area of a 6 inch circle gives 1.47.
Sources
- New York State Department of Health: Individual Water Supply Wells, Fact Sheet #2, Water Storage — well yield, 5 gpm peak demand, 110 gallons per bedroom, storage table, 1.5 gallons per foot of 6 inch casing
- NIST Guide to the SI (SP 811), Appendix B.9 — US gallon and cubic inch: 231 cubic inches per gallon