Plumbing & Water · Calculator
Pool Volume and Heat-Up Time Calculator
Enter the shape, size and depths of the pool to get its volume in gallons. Add the temperature rise you want and your heater's input rating and efficiency, and the calculator estimates the hours it takes to heat.
Pool volume
18,193 gallons
- Surface
- 512 sq ft
- Average depth
- 4.75 ft
- Volume
- 2,432 cubic feet
- Heat to raise it 20 °F
- 3,030,272 Btu
- Heater output
- 205,000 Btu/h
- Heat-up time
- 14.8 hours, at least
The time ignores the heat the pool loses while it warms, so the real time is longer.
If your heater lists its heating output instead of its input, enter the output with an efficiency of 100 percent.
Geometry; water weight from USGS; Btu from EIA.
A 32 by 16 foot pool, 3.5 feet deep at the shallow end and 6 at the deep end, holds 18,193 gallons. Warming it 20 °F takes at least 14.8 hours with a 250,000 Btu/h heater.
Volume
The volume is the surface area times the average depth. For a pool that slopes from a shallow to a deep end, the average depth is taken as halfway between the two. The surface is length × width for a rectangle, π × diameter × diameter ÷ 4 for a round pool, and π × length × width ÷ 4 for an oval taken as an ellipse. A cubic foot is 1,728 cubic inches and a US gallon 231, so each cubic foot holds about 7.48 gallons.
Heat needed
One British thermal unit raises one pound of water by 1 °F. Water at 70 °F weighs 62.3 pounds per cubic foot according to the USGS, about 8.33 pounds per gallon, so the heat needed is the pounds of water times the temperature rise.
A worked example
A 32 by 16 foot pool runs from 3.5 to 6 feet deep, an average of 4.75 feet: 512 × 4.75 = 2,432 cubic feet, or 18,193 gallons. Raising it 20 °F takes 3,030,272 Btu. A 250,000 Btu/h heater with a thermal efficiency of 82 percent puts 205,000 Btu an hour into the water, so it needs at least 14.8 hours.
Heat-up time
The calculator takes the heat a heater puts into the water as its input in Btu per hour times its thermal efficiency, both from its rating plate or data sheet. If your heater lists its heating output instead, enter the output with an efficiency of 100 percent. Dividing the heat needed by that output gives the hours. The water also loses heat while it warms, through its surface and walls, so the real time is longer than this figure.
Questions people ask
How many gallons are in a pool?
Multiply the surface area by the average depth to get cubic feet, then by about 7.48. A 32 by 16 foot pool averaging 4.75 feet deep holds about 18,193 gallons.
How long does it take to heat a pool?
At least the heat needed divided by the heater's output. For that pool, a 20 °F rise with a 250,000 Btu/h heater at 82 percent efficiency takes at least 14.8 hours, plus whatever the pool loses meanwhile.
How many Btu to heat a pool one degree?
About 8.33 Btu per gallon of water for each degree Fahrenheit.
Sources
- NIST Guide to the SI (SP 811), Appendix B.9 — 231 cubic inches per US gallon, 1,728 per cubic foot
- USGS Water Science School: Water Density — 62.300 lb per cubic foot at 70 °F
- U.S. Energy Information Administration: British thermal units (Btu) — one Btu raises one pound of water by 1 °F