Yard & Concrete · Calculator
Fence Calculator
Enter each straight run of the fence, the post spacing and the height. The calculator counts the posts, sections and rails, sizes the post holes and works out how many bags of fast-setting concrete to buy.
Posts
23
- Fence length
- 160 ft in 2 runs
- Sections
- 21 at up to 8 ft
- Rails
- 63 (3 per section)
- Hole for each post
- 10.5 in wide, 36 in deep
- Post length
- 9 ft (6 ft above ground)
- Concrete per post
- 1.55 cu ft = 4.13 bags, so 5
- Concrete in all
- 115 × Quikrete Fast-Setting Concrete Mix, 50 lb
Includes 1 extra post for the gate: a gate opening rarely falls exactly on the regular spacing.
Hole and depth rules and bag yields from the Quikrete and Sakrete data sheets. Concrete fills the hole around a square post, above any gravel.
A fence plan starts from the runs and the post spacing. Runs of 100 and 60 feet with posts every 8 feet and one gate take 23 posts, and at 6 feet tall each hole is 36 inches deep and takes 5 bags of fast-setting concrete.
Counting posts
Each run of fence is divided into sections no longer than the post spacing, and every section needs a post at each end. Runs are entered in order, so a corner post is shared between two runs; if the fence closes on itself, the last post is the first. The spacing comes from the fence maker: Weatherables sets its vinyl panels on posts 72 or 96 inches apart, center to center, and Master Halco's chain-link instructions space line posts no more than 10 feet apart.
Gates add posts, because a gate opening rarely falls exactly on the regular spacing. The calculator adds one post for each gate; size the opening itself with the gate opening calculator.
How deep and how wide
Quikrete's data sheet for its fast-setting concrete says to dig the hole about 3 times the width of the post and a third of the post's overall length deep. Sakrete's sheet gives the same two rules. A third of the total length is the same as half of the height above ground: a fence 6 feet tall needs posts set 3 feet deep, so the posts are 9 feet long. Sakrete also suggests 4 to 6 inches of gravel at the bottom of the hole.
Some makers set their own figures. Weatherables, for example, asks for a 10 inch hole for its 4 inch vinyl posts and 30 to 36 inches of depth, 40 for fences 8 feet tall. Where your fence maker gives a figure, use it: enter the hole diameter, and adjust the height if they ask for a different depth.
How much concrete
The concrete fills the round hole around the square post, above any gravel. The calculator works out that volume and divides it by the yield printed on the bag: a 50 pound bag of Quikrete Fast-Setting Concrete Mix makes about 0.375 cubic feet and a 60 pound bag about 0.45; a 50 pound bag of Sakrete Fast Setting makes about 0.38. It rounds up for each hole, since fast-setting mix is poured into one hole at a time.
The arithmetic matches the makers' own figures. Sakrete's table for a 10 inch hole lists 1.25 bags at 12 inches deep, 2 at 18, 2.5 at 24 and 3 at 30, which is what the volume around a 4×4 post gives. Quikrete's sheet says two 50 pound bags will set a 3 inch post in a 9 inch hole 30 inches deep; filling that hole to the top takes about 2.53 bags, so the calculator says three.
A worked example
A backyard fence runs 100 feet along the back and 60 feet down one side, with posts every 8 feet and one gate. That makes 21 sections, so 23 posts counting the shared corner and the extra gate post, and with 3 rails per section, 63 rails. For a fence 6 feet tall on 4×4 posts, which are 3-1/2 inches wide, each hole is 10.5 inches wide and 36 inches deep. The concrete around each post is 1.55 cubic feet, 4.13 bags of 50 pounds, so 5 bags per post and 115 bags in all.
Questions people ask
How deep should fence posts be?
Quikrete and Sakrete both say a third of the post's total length, which is half of the height above ground: 3 feet for a 6 foot fence. Some fence makers ask for their own depth, so follow their instructions when they give one.
How many bags of concrete per fence post?
It depends on the hole. For a 4×4 post in a 10 inch hole 30 inches deep, Sakrete's table says 3 bags of 50 pounds. Enter your own hole size and the calculator works it out from the bag's printed yield.
How far apart should fence posts be?
As far as your fence system allows: vinyl panels are usually 6 or 8 feet wide, and Master Halco spaces chain-link line posts no more than 10 feet apart. Taller and more solid fences catch more wind and need closer posts.
Sources
- Quikrete Fast-Setting Concrete Mix 1004-50/60 data sheet (Revised November 2025) — bag yields, hole width and depth, post-setting example
- Sakrete Fast Setting Concrete Mix technical data sheet (Rev. 05/18) — bag yield, post-setting table, gravel base
- Weatherables Vinyl Fencing Installation Guide (WEA01-2017) — post spacing, hole size and depth for vinyl
- Master Halco: Chain-Link Fence & Gate Installation Instructions (MH 046103) — line posts no more than 10 ft apart