Yard & Concrete · Calculator
Fence Gate Opening Calculator
Enter the width of the gate and the gaps your hinge and latch call for. The calculator gives the distance between the two gate posts, measured between their inside faces, before you set them in concrete.
Distance between the gate posts
50 in
- Gate
- Single, 48 in
- Gaps
- 1 in hinge side + 1 in latch side
Measured between the inside faces of the two posts. Chain-link gates sold by opening size already include these gaps.
Gate width plus the gaps your hinge and latch need.
Gate posts are set farther apart than the gate is wide, to leave room for the hinges and the latch. A single 48 inch gate with 1 inch gaps on each side needs the posts 50 inches apart.
Why the gaps matter
A gate needs a little clearance on each side to swing: on the hinge side for the hinges themselves, and on the latch side so the gate closes into the latch without rubbing the post. Set the posts too close and the gate will not fit; too far and the latch will not reach. Once the posts are in concrete, there is no fixing it, so the spacing comes first.
What the makers ask for
- Weatherables, a vinyl fence maker, says the hinge and the latch need a 1 inch gap each, and a double gate needs an additional 1 inch between the leaves.
- Nationwide Industries lists a working range for each part in its gap chart: from 0.4 to 1.3 inches for one of its hinges and from 0.31 to 1.31 inches for one of its latches, and asks for a 3/8 inch gap for its NW6185 wood gate latch.
- D&D Technologies gives a range of 1/2 to 1-1/2 inches for its MagnaLatch top-pull latch, with 3/4 inch as the ideal gap.
- Master Halco sells chain-link gates by the opening they fit: the clearance is already included, so a 36 inch gate goes between posts set exactly 36 inches apart.
Use the figures in the instructions of the hinges and latch you actually buy.
A worked example
A 48 inch wide gate hangs on hinges that need 1 inch and closes into a latch that needs 1 inch, the figures Weatherables gives. The posts go 50 inches apart, inside face to inside face: the gate plus 2 inches of gaps.
Double gates
A double gate has two leaves, each hinged on its own post, so it needs a hinge gap on both sides plus a gap where the two leaves meet. Choose the double gate in the calculator and enter the gap your center latch or drop rod needs.
Questions people ask
How much gap should a gate have?
It depends on the hardware: Weatherables says 1 inch for the hinge and 1 inch for the latch; D&D's MagnaLatch works from 1/2 to 1-1/2 inches, ideally 3/4. Check your hinge and latch instructions.
Do I measure from the center of the posts?
No. Measure between the inside faces of the two gate posts, the faces the gate swings between.
Sources
- Weatherables Vinyl Fencing Installation Guide (WEA01-2017) — 1 in gap for hinge and latch, 1 in more for a double gate
- Nationwide Industries: gate hardware gap chart — gap ranges per hinge and latch
- D&D Technologies: MagnaLatch ALERT Top Pull installation sheet — gap variance 1/2 to 1-1/2 in
- Master Halco: Chain-Link Fence & Gate Installation Instructions (MH 046103) — clearance included in the listed gate opening